QR-TZ-017-001零件认可提交单侧最大值 (MAX)'01 PSW'!A21过程工序能力认可报告（CPk&PPk）双侧最大和最小值'07 CAV'!A6'01 PSW'!H6'01 PSW'!A6(请查看第二页备注项)检查人员/日期：吴灿灿2014.10.2 生产日期：单侧最小值（MIN）'01 PSW'!A14'01 PSW'!D10'01 PSW'!A8每小组样本容量数5重要数据分布趋势2014-9-27上升趋势过程工序相关数据X Chart4133143R Chart3131111工厂地址厂名零件编号图纸编号710500744710500744送交部门产品名称工程变更等级工序号/工序名称108.000公差正（+）中心值2.0品管部卡箍N/A电镀单位10日期：连续上升点数发生次数下降趋势连续下降点数发生次数设备模具（工夹具）尺寸规格设备编号工装编号规格规格下限mm公差负（-）规格上限超过规格上下限次数-2.012.0连续点分布在平均值之上连续点分布在平均值之下11.5011.0010.50平均值10.009.509.008.50123456710111213141516171819202122232425UCLxAveXLCLxData X-bar7.00 6.00 5.00 极差4.00 3.00 2.00 1.00 0.00 123456710111213141516171819202122232425UCLrAveRLCLr小组极差过程工序能力认可报告（CPk&PPk）零件认可提交工厂地址零件设备模具（工夹具）尺寸规格厂名零件编号图纸编号设备编号工装编号规格规格下限0710500744710500744送交部门产品名称工程变更等级工序号/工序名称公差正（+）中心值2.010 LSL3633302724211815129630系列2系列18.0000品管部卡箍N/A单位日期：2014-9-27108柱壮图（不包括上下限）mm公差负（-）规格上限柱状图（包含上下限） USL-2.012.012010512.000010080604005.606.407.2LSL0811808..610.411.2USL01220012.8013.60统计项目检测样本总数规格下限 (LSL)中心值规格上限(USL)总和总平均数最大值最小值超下限值个数超上限值个数极差平均值 (R)D2 值n =5上限工序能力指数 (CPU)下限工序能力指数 (CPL)能力指数 (Cp)工序能力指数 (Cpk)工序能力比率 (CR)标准偏差(n-1)标准偏差 (n)方差 (n-1)方差 (n)工序能力(PP)比率(PR)初始过程能力指数 (Ppk)15161718数值1258.000010.000012.00001,253.000010.024016.00009.0000001.00002.32601.53211.56931.55071.53210.490.66560.66290.44300.43941.00170.99830.961920Sn group12345123456U7B8G9R10O11U12P13S1410.0009.00010.00010.00010.00010.0009.00010.00010.00010.00010.00010.00010.00010.00010.00011.00010.00010.00010.00010.00010.00010.00016.00010.00010.00010.00010.00010.00010.00010.00010.00010.00010.0009.00010.00010.00011.00010.00010.00010.00010.00010.00010.00010.00010.00010.0009.00010.00010.00010.00010.0009.00010.00010.00010.00010.00010.00010.00010.00011.00010.00010.00010.00010.00010.00010.0009.00010.00010.00010.00010.00010.00010.0009.00010.00011.00010.00010.00010.00010.00010.00010.00011.00010.00010.00010.00011.00010.00010.00010.00010.00010.00010.00010.00011.00010.00010.0009.00010.00010.000小组平均值小组极差n group12345219.81.0229.81.02310.00.02410.21.02511.26.010.00.09.81.010.21.010.00.09.81.09.81.010.21.010.00.09.81.09.81.010.21.010.21.010.21.010.21.09.81.0NOut of control limits (X) - Out of control limits (R) - Process substandard, needs improvement (PPk < 1.33). OTES10.00010.00010.00010.00010.0009.00010.00010.00010.00010.00010.00010.00011.00010.00010.00010.00010.0009.00010.00010.00010.0009.00010.00010.00010.000小组平均值小组极差10.00.09.81.010.21.09.81.09.81.0
