加工五金行业英语

锻造 forging 铸造 casting 浇铸 moulding 毛坯件 rough

下料 cutting material 压弯 bending 整形 shaping

压球 pressing into ball 压扁 pressing to be flat 敦台

加热 heating

氧化处理 oxidation processes 氧化皮 oxide film

电磁炉 induction cooker 电炉 electric furnace 钝化处理 passivation 成型 moulding 机加工 machining 工序 process

生产工序 process of produceing 不锈钢 stainless steel 原材料 raw material 车丝 lathe thread 搓丝 滚丝

抛光处理 polishing process 抛光 polishing

人工抛光 manual polishing 机械抛光 machine polishing 电解 electroanalysis 振动 shaking 酸洗 套丝

钻孔 drilling

扩孔 enlarge the hole 冲压 press

冲压设备 press equipment 机床加工 machining 数控加工 CNC 螺纹大径：Major Diam 螺纹 中径：Pitch diam 螺纹 底径：Minor diam

通止规：Go/No go gage

机械性能：mechanical and physical properties unified thread 统一英制螺纹

Lustrate hydrogen after galvanizing to avoid hydrogen embrittlement 镀后去氢，防止氢脆 Case carburization 表面渗碳 With across flats 对边 With across corners 对角 Radius of fillet:头下圆角

Transition thread length 过度螺纹 Wrenching height 扳拧高度 Rockwell 铬氏硬度 Vickers 维氏硬度 Brinell 布氏硬度

Metallography microscope 金相显微镜 Salt spray device 盐雾试验箱

Tensile testing machine 拉力试验机 Cold forming 冷打 Hot forging 红镦

P C 8 = property class 8 机械性能8级 原材料qww

球化退火：Annealing 冷拔：Drawing 冷镦：Forming 机加工：Machining

螺纹成型：Roll Threading 热处理：heat-treatment 表面处理：finish

去氢：Lustrating hydrogen 检验：Inspection 包装：Packing 入库：Stocking 车床：lathe 磨制：grinding 红打：hot forging 冲压：punching Diameter 直径 Length 长度 1 标准

GB （国标）ISO(国际标准) DIN （德制） JIS （日标）

ANSI /ASME （美标） BA （英制） 2 螺纹

M. MF (公制牙) UNC.UNF (美制牙)

BSW.BSF (英制牙) 3 海关编码

BO=black oxide 氧化发黑 IHH=ind hex head 锯 六角头 PH=phillips 十字槽

sw/fw=split washer/flatwasher 弹垫 平垫 kep nut 锁紧螺母 cementation 渗碳 acorn nut 盖形螺母 螺丝头型

Pan 圆头(盘头) Oval 半沉头

CSK 沙拉头(沉头) Large wafer 大扁平头 Bugle 喇叭头 Truss 盘头带垫 Pozi 米制槽 Phill 十字槽

Serra-tion 垫下带花 Flower Head 开花头 6-bobes recess 内梅花 Piston bolt 活塞螺钉 Winding bolt 线圈螺钉

Hexagon head bolts-full thread 六角头螺栓 全螺纹 Carriage bolt 马车螺栓

Square head bolt-product grade C 方头螺栓 C级 Flat counter sunk square neck bolts 沉头方颈螺栓 Flat counter sunk nib bolts 沉头带榫螺栓 Cup head square neck bolts 半圆头方螺栓 Cup head nib bolts 半圆头带榫螺栓

Cup head square neck bolts with large head –product grade C大半圆头方颈螺栓 C级 Hexagon head bolts-product grade C六角头螺栓 C级

Hexagon head bolts-full thread –product grade C 六角头螺栓 全螺纹 C级 Hexagon head bolts 六角头螺栓

Hexagon head bolts –full thread 六角头螺栓 全螺纹

Hexagon head bolts-reduced shank-product grade B六角头螺栓 细杆B级 Hexagon head bolts with fine pitch thread 六角头螺栓 细牙

Hexagon head bolts with fine pitch thread full thread六角头螺栓 细牙 全螺纹

Hexagon flange bolts –heavy series-product grade B 六角法兰面螺栓 加大系列车员 B级 Cross recessed pan head tapping screws 十字槽盘头自攻螺钉

Hexagon flange drilling screw with tapping screw thread 六角法兰面自钻自攻螺钉 螺栓、螺钉 BOLTS & SCREWS

德制六角头螺栓 HEXAGON HEAD BOLTS DIN931 德制六角头螺栓 HEXAGON HEAD BOLTS DIN601 德制六角头螺钉 HEXAGON HEAD SCREWS DIN933 德制六角头螺钉 HEXAGON HEAD SCREWS DIN558

六角头螺栓 HEXAGON HEAD BOLTS ISO4014 六角头螺钉 HEXAGON HEAD SCREWS ISO4017 美制六角头螺栓 HEX BOLTS IFI C-6(A-6)

美制六角头螺钉 HEX CAP SCREWS IFI C-10(A-10) 吊装螺栓 DRAW BOLTS

德制圆头方颈螺栓 MUSHROOM HEAD SQUARE NECK BOLTS DIN603 英制圆头方颈螺栓 ROUND HEAD SQUARE NECK BOLTS B.S. 美制圆头方颈螺栓 ROUND HEAD SQUARE NECK BOLTS IFI C-40

德制内六角圆柱头螺钉 HEXAGON SOCKET HEAD CAP SCREWS DIN912

内六角沉头螺钉 HEXAGON SOCKET COUNTERSUNK HEAD CAP SCREWS DIN7991 拇指螺钉 THUMB SCREWS IFI J-26

内六角平头紧定螺钉 HEXAGON SOCKET SET SCREWS WITH FLAT POINT DIN913 内六角锥端紧定螺钉 HEXAGON SOCKET SET SCREWS WITH CONE POINT DIN914 内六角圆柱端紧定螺钉 HEXAGON SOCKET SET SCREWS WITH DOG POINT DIN915 内六角凹端紧定螺钉 HEXAGON SOCKET SET SCREWS WITH CUP POINT DIN 916 英制六角螺闩 BLACK MILD STEEL HEXAGON BOLTS WITH NUTS B.S. 德制吊环螺钉 LIFTING EYE BOLTS DIN580

德制六角法兰面螺栓 HEXAGON FLANGE BOLTS DIN6921

美制六角法兰面螺钉 HEX FLANGE BOLTS IFI 111 1986 C-28 德制钢结构用带螺母的六角头螺栓 HEXAGON BOLTS WITH HEXAGON NUTS FOR STEEL STRUCTURES DIN7990 钢结构用高强度大六角头螺栓 HEXAGON BOLTS WITH LARGE WIDTHS ACROSS FLATS FOR HIGH-TENSILE BOLTING IN STEEL STRUCTURES DIN6914

钢结构用高强度大六角螺母 HEXAGON NUTS WITH LARGE WIDTHS ACROSS FLATS FOR HIGH-TENSILE IN STEEL STRUCTURES DIN6915

钢结构用高强度垫圈 WASHERS FOR HIGH-TENSILE BOLTING IN STEEL STRUCTURES DIN6916 美制六角结构螺栓 HEAVY HEX STRUCTURAL BOLTS IFI E-34

结构钢联结件用的高强度螺栓 HIGH STRENGTH BOLTS FOR STRUCTURAL STEEL JOINTS ASTM A325 TYPE 1

热处理的钢结构螺栓、最小抗拉强度150ksi HEAT-TREATED STEEL STRUCTURAL BOLTS 150ksi MIN. TENSILE STRENGTH A490 TYLPE 1

钢结构用扭剪型高强度螺栓连接副 SETS OF TORSHEAR TYPE HIGH STRENGTH BOLT HEXAGON NUT AND PLAIN WASHER FOR STEEL STRUCTURES JSS 1109-1981 螺杆 STUDS DIN B.S. ANSI

弯曲螺栓 BENT BOLTS IFI 136 1986 C-86-87

花兰螺丝 TURNBUCKLE WITH HOOK AND EYE DIN1480 钢管扣件 STEEL PIPESCAFFOLD ISO 40 JIS A51 六角螺母 HEXAGON NUTS

德制六角螺母 HEXAGON NUTS DIN934 德制六角螺母 HEXAGON NUTS DIN555 六角螺母 HEXAGON NUTS ISO4032 六角螺母 HEXAGON NUTS ISO4033 六角螺母 HEXAGON NUTS ISO4034 六角螺母 HEXAGON NUTS AS1112

美制六角螺母和六角锁紧螺母 HEAVY HEX NUTS AND HEAVY HEX JAM NUTS IFI D-5(D-6)

美制重型六角螺母和重型六角锁紧螺母 HEAVY HEX NUTS AND HEAVY HEX JAM NUTS IFI D-14(D-12) 美制六角厚螺母 HEX THICK NUTS IFI D-8

日制六角螺母 HEXAGON NUTS B1181-1961 JIS 日制六角螺母 B1181 JIS

六角螺母 HEXAGON NUTS UNI 5587

德制六角薄螺母 CHAMFERED HEXAGON THIN NUTS DIN439 六角薄螺母 HEXAGON THIN NUTS ISO4035 德制六角薄螺母 HEXAGON THIN NUTS DIN936 方螺母 SQUARE NUTS

德制方形薄螺母 SQUARE THIN NUTS DIN562

美制方形机螺钉螺母 SQUARE MACHINE SCREWS NUTS IFI D-26 英制方螺母 SQUARE NUTS B.S. 美制方螺母 SQUARE NUTS IFI D-3

美制重型方螺母 HEAVY SQUARE NUTS IFI D-12 德制方螺母 SQUARE NUTS DIN557 英制方螺母 SQUARE NUTS B.S. 吊环螺母 LIFTING EYE NUTS

公制外型的寸制螺母 METRIC DIMENSIONS NUTS WITH UNC OR BSW THREAD 德制吊环螺母 LIFTING EYE NUTS DIN582 六角法兰面螺母 HEXAGON NUTS WITH FLANGE

德制六角法兰面螺母 HEXAGON NUTS WITH FLANGE DIN6923 美制六角法兰面螺母 HEX FLANGE NUTS IFI D-21 蝶形螺母 WING NUTS DIN315

德制非金属嵌件六角锁紧螺母 PREVAILING TORQUE TYPE HEXAGON THIN NUTS WITH NONMETALLIC INSERT DIN985

德制金属嵌件六角锁紧螺母 ALL-METAL PREVAILING TORQUE TYPE HEXAGON NUTS DIN980 焊接六角螺母 HEXAGON WELD NUTS DIN929 六角开槽螺母 HEXAGON SLOTTED NUTS

六角开槽螺母 HEXAGON SLOTTED NUTS DIN935

六角开槽薄螺母 HEXAGON THIN SLOTTED NUTS DIN937 六角开槽薄螺母 HEXAGON THIN SLOTTED NUTS DIN979 盖形螺母 HEXAGON CAP NUTS

盖形螺母 HEXAGON CAP NUTS DIN917

盖形螺母 HEXAGON DOMED CAP NUTS DIN986 盖形螺母 HEXAGON DOMED CAP NUTS DIN1587 弹簧垫圈 SPRING WASHERS

德制弹簧垫圈 SPRING LOCK WASHERS DIN127 英制弹簧垫圈 SPRING LOCK WASHERS B.S. 美制弹簧垫圈 LOCK WASHERS IFI L-9(K-13) 平垫圈 PLAIN WASHERS

德制垫圈 WASHERS (Grade A) DIN125 德制垫圈 WASHERS (Grade C) DIN126

美制平垫圈（窄型） PLAIN WASHERS (NARROW) IFI L-2(K-4) 美制平垫圈（宽型） PLAIN WASHERS (WIDE) IFI L-2(K-4) 美制淬火垫圈 HARDENED STEEL WASHERS ASTM F436 开口销 SPLIT PINS

德制开口销 SPLIT PINS DIN94 美制开口销 COTTER PINS L-38

开口销 SPLIT PINS ISO1234 英制开口销 COTTER PINS B.S. 抽芯铆钉 BLIND RIVET 抽芯铆钉 BLIND RIVET

封闭形抽芯铆钉 SEALED TYPE ALUMINIUM BLIND RIVET 机器螺钉 MACHINE SCREWS

英制镀锌瓦楞螺闩 GALVANIZED ROOFING BOLTS & NUTS B.S. 德制瓦楞螺闩 ROOFING BOLTS & NUTS

德制开槽圆柱头螺钉 SLOTTED CHEESE HEAD SCREWS DIN84 德制开槽盘头螺钉 SLOTTED PAN HEAD SCREWS DIN85

美制开槽盘头机螺钉 SLOTTED PAN HEAD MACHINE SCREWS IFI I-22(F-24)

德制十字槽球面圆柱头螺钉 CROSS RECESSED RAISED CHEESE HEAD SCREWS DIN7985 美制十字槽盘头机螺钉 CROSS RECESSED PAN HEAD MACHINE SCREWS IFI I-23(F-25) 德制开槽沉头螺钉 SLOTTED COUNTERSUNK HEAD SCREWS DIN963

美制开槽沉头机螺钉 SLOTTED FLAT COUNTERSUNK HEAD MACHINE SCREWS IFI I-6(F-8) 德制十字槽沉头螺钉 CROSS RECESSED COUNTERSUNK FLAT HEAD SCREWS DIN965

美制十字槽沉头机螺钉 CROSS RECESSED FLAT COUNTERSUNK HEAD MACHINE SCREWS IFI I-7(F-9) 德制开槽半沉头螺钉 SLOTTED RAISED COUNTERSUNK HEAD SCREWS DIN9

美制开槽半沉头机螺钉 SLOTTED OVAL COUNTERSUNK HEAD MACHINE SCREWS IFI I-16(F-18) 德制十字槽半沉头螺钉 CROSS RECESSED RAISE COUNTERSUNK HEAD SCREWS DIN966

美制十字槽半沉头机螺钉 CROSS RECESSED OVAL COUNTERSUNK HEAD MACHINE SCREWS IFI I-17（F-19） 美制开槽扁圆头机螺钉 SLOTTED TRUSS HEAD MACHINE SCREWS IFI I-26(F-28)

美制十字槽扁圆头机螺钉 CROSS RECESSED TRUSS HEAD MACHINE SCREWS IFI I-27(F-29) AT吊装螺栓 ACOUSTICAL TOGGLES 木螺钉 WOOD SCREWS

德制开槽半沉头木螺钉 SLOTTED RAISED COUNTERSUNK HEAD WOOD SCREWS DIN95 美制开槽半沉头木螺钉 OVAL COUNTERSUNK HEAD WOOD SCREWS IFI J-38(F-58)

德制十字槽半沉头木螺钉 CROSS RECESSED RAISED COUNTERSUNK HEAD WOOD SCREWS DIN7995 美制十字槽半沉头木螺钉 OVAL COUNTERSUNK HEAD WOOD SCREWS IFI J-39(F-59) 德制开槽半圆头木螺钉 SLOTTED ROUND HEAD WOOD SCREWS DIN96

德制十字槽半圆头木螺钉 CROSS RECESSED ROUND WOOD SCREWS DIN7996 德制开槽沉头木螺钉 SLOTTED COUNTERSUNK HEAD WOOD SCREWS DIN97

美制开槽沉头木螺钉 FLAT COUNTERSUNK HEAD WOOD SCREWS IFI J-36(F-56) AE木螺钉 ACOUSTICALL EYELAGS

德制十字槽沉头木螺钉 FLAT COUNTERSUNK HEAD WOOD SCREWS DIN7997

美制十字槽沉头木螺钉 CROSS RECESSED COUNTERSUNK HEAD WOOD SCREWS IFI J-37(F-57) 德制六角头木螺钉 HEXAGON HEAD WOOD SCREWS DIN571 美制六角头木螺钉 HEX LAG SCREWS IFI C-18

米字槽双线木螺钉 POZIDRIVE TWINFAST WOOD SCREWS B.S. 织维板螺钉 CHIPBOARD SCREWS HARDENED 织维板螺钉 CHIPBOARD SCREWS HARDENED

大螺距带筋织维板螺钉 CHIPBOARD SCREWS WITH RIBS UNDER THE HEAD 高低牙加硬螺钉 FERMACELL SCREWS WITH RIBS UNDER THE HEAD 自攻螺钉 TAPPING SCREWS

德制开槽盘头自攻螺钉 PAN HEAD TAPPING SCREWS WITH SLOT DIN7971

美制开槽盘头自攻螺钉 SLOTTED PAN HEAD TAPPING SCREWS IFI H-38(E-34)

德制十字槽盘头自攻螺钉 CROSS RECESSED PAN HEAD TAPPING SCREWS DIN7981

美制十字槽盘头自攻螺钉 CROSS RECESSED PAN HEAD TAPPING SCREWS IFI H-39(E-35) 德制开槽沉头自攻螺钉 COUNTERSUNK HEAD TAPPING SCREWS WITH SLOT DIN7972

美制开槽沉头自攻螺钉 SLOTTED FLAT COUNTERSUNK HEAD TAPPING SCREWS IFI H-24(E-20) 德制开槽半沉头自攻螺钉 RAISED COUNTERSUNK HEAD TAPPING SCREWS WITH SLOT DIN7973 美制开槽半沉头自攻螺钉 SLOTTED OVAL COUNTERSUNK HEAD TAPPING SCREWS IFI H-32(E-28)

德制十字槽半沉头自攻螺钉 CROSS RECESSED RAISED COUNTERSUNK HEAD TAPPING SCREWS DIN7983 美制十字槽半沉头自攻螺钉 CROSS RECESSED OVAL COUNTERSUNK HEAD TAPPING SCREWS IFI H-33(E-39)

双线快牙干壁-S型十字槽喇叭头 DRY WALL SCREWS TYPE S PHILLIPS RECESSED BUGLE HEAD TWINFAST 粗牙干壁螺钉 DRY WALL SCREWS

德制十字槽沉头自攻螺钉 CROSS RECESSED COUNTERSUNK HEAD TAPPING SCREWS DIN7982

美制十字槽沉头自攻螺钉 CROSS RECESSED FLAT COUNTERSUNK HEAD TAPPING SCREWS IFI H-25(E-21) 十字槽扁圆头带垫面自攻螺钉 CROSS RECESSED PAN HEAD TAPPING SCREWS WITH COLLAR DIN968 六角头带垫面自攻螺钉 HEXAGON WASHER HEAD TAPPING SCREWS DIN6928 自钻自攻螺钉 SELF-DRILLING TAPPING SCREWS DIN7504 螺栓包装 PACKING OF BOLTS

六角头螺栓 HEXAGON HEAD BOLTS DIN931 DIN601 DIN7990 六角头螺栓 HEXAGON HEAD BOLTS DIN931 DIN601 DIN7990 六角头螺栓 HEXAGON HEAD BOLTS ISO4014

圆头方颈螺栓 MUSHROOM HEAD SQUARE NECK BOLTS DIN603 圆头方颈螺栓 ROUND HEAD SQUARE NECK BOLTS IFI C-40 六角螺钉包装 >PACKING OF HEXAGON HEAD SCREWS 六角头螺钉 HEXAGON HEAD SCREWS DIN933 DIN558 六角头螺钉 HEXAGON HEAD SCREWS DIN933 DIN558 六角头螺钉 HEXAGON HEAD SCREWS ISO4017 六角头螺钉 HEX CAP SCREWS IFI C-10(A-10)

内六角螺钉包装 PACKING OF HEXAGON SOCKET HEAD CAP SCREWS DIN912

内六角沉头螺钉包装 PACKING OF HEXAGON SOCKET COUNTERSUNK HEAD CAP SCREWS DIN7991 螺母包装 PACKING OF NUTS

六角螺母 HEXAGON NUTS DIN934，DIN555 六角螺母 HEXAGON NUTS AS1112，ISO4032 六角薄螺母 HEXAGON THIN NUTS DIN439 六角薄螺母 HEXAGON THIN NUTS DIN936 尼龙锁紧螺母 NYLON JAM NUTS DIN985 六角开槽螺母 HEX SLOTTED NUTS DIN935 方形薄螺母 SQUARE THIN NUTS DIN562 方螺母 SQUARE NUTS DIN557 蝶形螺母 WING NUTS DIN315 六角螺母 HEXAGON NUTS DIN5587 吊环螺母 LIFTING EYE NUTS DIN582

六角法兰面螺母 HEXAGON NUTS WITH FLANG DIN6923 六角螺母 HEXAGON NUTS BS1768

厚六角螺母 HEXAGON THICK NUTS BS1768 六角螺母 HEXAGON NUTS BS916

六角螺母 HEXAGON NUTS IFI D-5(D-6)

六角锁紧螺母 HEX JAM NUTS IFI D-5(D-6) 重型六角螺母 HEAVY HEX NUTS A325, IFI D-14 螺母包装 PACKING OF NUTS

六角开槽螺母 HEX SLOTTED NUTS DIN937

六角盖型螺母 HEXAGON DOMED CAP NUTS DIN1587 焊接六角螺母 HEXAGON WEID NUTS DIN929 垫圈包装 PACKING OF WASHERS 垫圈 WASHERS DIN125,DIN126

弹簧垫圈 SPRING LOCK WASHERS DIN127 弹簧垫圈 LOCK WASHERS IFI L-9(K-13) 机螺钉包装 PA CKING OF MACHINE SCREWS

开槽圆柱头螺钉 SLOTTED CHEESE HEAD SCREWS DIN84 开槽沉头螺钉 SLOTTED COUNTERSUNK HEAD SCREWS DIN963 开槽盘头螺钉 SLOTTED PAN HEAD SCREWS DIN85

十字槽球面圆柱头螺钉 CROSS RECESSED RAISED CHEESE HEAD SCREWS DIN7985 自攻螺钉包装 PACKING OF TAPPING SCREWS

开槽、十字槽沉头自攻螺钉 COUNTERSUNK HEAD TAPPING SCREWS DIN7972, DIN7982 开槽、十字槽盘头自攻螺钉 PAN HEAD TAPPING SCREWS DIN7971, DIN7981 木螺钉包装 PACKING OF WOOD SCREWS

开槽半沉头木螺钉 SLOTTED RAISED COUNTERSUNK HEAD WOOD SCREWS DIN95 开槽半圆头木螺钉 SLOTTED ROUND HEAD WOOD SCREWS DIN96 开槽沉头木螺钉 SLOTTED COUNTERSUNK HEAD WOOD SCREWS DIN97 六角头木螺钉 HEXAGON HEAD WOOD SCREWS DIN571 织维板螺钉包装 PACKING OF CHIPBOARD SCREWS 织维板螺钉 CHIPBOARD SCREWS HARDENED

双线快牙干壁螺钉 DRY WALL SCREWS TWINFAST