气源分配阀组

Description: High Pressure Distribution Manifold with up to 20 globe style needle valves, using standard \"H\" series bonnets. Alternatively using outside screw and yoke style (O.S. & Y.)

Series: *DM (*H or Y) Main outlet (B) (Hidden)

Distribution outlets C (6 in this example)

Main inlet (A)

Maximum number of valves: 20 Minimum number of valves: 4 Valve style: Self centering none rotating tip needle valve Max. size main inlet: 1\" pipe thread, 2\" socket weld, 2\" flange

Min. size main inlet: 1/4\" female pipe thread/tube or pipe socket weld Max. size main outlets: 1\" pipe thread, 2\" socket weld, 2\" flange

Min. size main outlets: 1/4\" female pipe thread/tube or pipe socket weld

As standard, 2 connections (one at each end) will be provided. One of these will be utilised by the user as an inlet, the other can either be blanked off or fitted with a valve to facilitate purging, should a purge valve be required then the style should be clearly stated at enquiry stage.

We can connect a single isolate valve to the inlet to act as a primary isolate valve allowing the user to totally isolate all the outlet valves from the supply point. Such a requirement must be stated separately at enquiry stage and the valve style should be clearly specified.

These additional valve requirements will be structured into the part number at quotation stage.

Mounting hole dia. 11mm

Pressure Rating: Max. 6000 psig (414 barg) for valves. Temperature Rating: Refer to CAT 4190HV for P/T graph.

Materials: Standard AISI 316 St. St. optional material and designators as listed in CAT 4190HV.

Options: All valve bonnet options listed in CAT 4190HV can be supplied with the exception of Round Handles and Panel Mount. Lead times: Max. up to 8 weeks. Minimum quantity: 5 off

Part Number Construction

Main in (A) Style (A & B) Distribution Style Options out (B) Conns. (C) Female (see note 1) 1/2\" - 8 FNPT - N 1/4\" - 4 Female NPT - N Suffix as per 3/4\" - 12 BSPT - K 3/8\" - 6 Female BSPT - K CAT 4190 HV 1\" - 16 BSPP - R 1/2\" - 8 Female BSPP - R 1 1/2\" - 24 Pipe socket weld - 3/4\" - 12 (see note 3) 2\" - 32 SWNB 1\" - 16 Tube socket weld - SWTB Flange - F(see note 2) Example part number: HDMS1416N8N6N3FS

Description: Distribution manifold (HDM) produced in 316 stainless steel (S) complete with 14 \"H\" bonnets (14) with 1\" (16) NPT (N) female main inlet connection, 1/2\" (8) NPT (N) female main outlet,

14 x 3/8\" (6) NPT (N) female distribution outlets, valves fitted with Graphoil packing (3) and Firesafe designed. (FS)

Note 1: When main outlet is different size to main inlet then add main outlet designator after main inlet designator.

Note 2: When flange connection required use the part no. designators in the Flange catalogue CAT 4190 FP for flange face and class.

Note 3: For customised bracket support please specify separately. Series Material No of Valves HDM 316 SS - S4 - 20 YDM

High Pressure \"H\" & \"Y\" Series Air Header Manifold June 2003 Issue 1

Series: *AHM (*H or Y)

Description: High Pressure Air Header Manifold with up to 20 globe style needle valve outlet positions, utilising standard \"H\" series bonnets. Alternatively using outside screw and yoke style. Assembled to manifold body using welded nipple to taper threaded valve connection.

Main outlet (B)

Distribution outlets C (8 in this example)

Main inlet (A)

Maximum number of valves: 20 Minimum number of valves: 4

Valve style: Self centering none rotating tip needle valve Max. size main inlet: 1\" pipe thread, 2\" socket weld, 2\" flange

Min. size main inlet: 1/4\" female pipe thread/tube or pipe socket weld Max. size main outlets: 1\" pipe thread, 2\" socket weld, 2\" flange

Min. size main outlets: 1/4\" female pipe thread/tube or pipe socket weld

As standard, 2 connections (one at each end) will be provided. One of these will be utilised by the user as an inlet, the other can either be blanked off or fitted with a valve to facilitate purging, should a purge valve be required then the style should be clearly stated at enquiry stage.

We can connect a single isolate valve to the inlet to act as a primary isolate valve allowing the user to totally isolate all the outlet valves from the supply point. Such a requirement must be stated separately at enquiry stage and the valve style should be clearly specified.

These additional valve requirements will be structured into the part number at quotation stage.

Mounting/support: Standard mounting as depicted in example or as specified by customer.

Pressure Rating: Max. 6000 psig (414 barg) for valves - Tube/Pipe size to be designated by customer Temperature Rating: Refer to CAT 4190HV for P/T graph. Materials: AISI 316 St. St.

Options: All valve bonnet options listed in CAT 4190HV can be supplied with the exception of Round Handles and Panel Mount. Lead times: Max. up to 8 weeks. Minimum quantity: 5 off

Part Number Construction Series Material No of Main in (A) Style (A & B) Distribution Style Options Valves out (B) Conns. (C) Female (see note 1) HAHM 316 SS - S 4 - 20 1/2\" - 8 FNPT – N 1/4\" - 4 Female NPT - N Suffix as per YAHM 3/4\" - 12 BSPT – K 3/8\" - 6 Female BSPT - K CAT 4190 HV 1\" - 16 BSPP – R 1/2\" - 8 Female BSPP - R Custom mount - 1 1/2\" - 24 Pipe socket weld - 3/4\" - 12 C 2\" - 32 SWNB 1\" - 16 (see note 3) Tube socket weld - SWTB Flange – F (see note 2)

Example part number: HAHMS1216SWNB16N8N3NACE

Description: Air header manifold (HAHM) produced in 316 stainless steel (S) complete with 12 \"H\" bonnets (12)with 1\" (16) socket weld pipe (SWNB) main inlet connection, 1\" (16) NPT (N) female main outlet,12 x 1/2\" (8) NPT (N) female distribution outlets, valves fitted with Graphoil packing (3) and NACE (NACE) certified.

Note 1: When main outlet is different size to main inlet then add main outlet designator after main inlet designator. Note 2: When flange connection required use the part no. designators in the Flange catalogue CAT 4190 FP Note 3: For customised bracket support please specify separately.

Low Pressure Air Distribution Manifold June 2003 Issue 1

Series: ADM

iption: Compact Low Pressure unit offering choice of 5 or 10 soft seated needle valves with Viton O ring packing. Knurled and d handle mechanism for easy operation and positive bubble tight shut off.

Main outlet (B) hidden

Distribution outlets C (10 in this example)

Main inlet (A)

er of valves: 5 or 10 (between 5 & 10 will be supplied as 10 way - redundant outlets can be plugged by user). style: \"O\" Ring packed soft tipped (Teflon) size main inlet: 1/2\" female pipe thread ize main inlet: 1/4\" female pipe thread size main outlets: 1/2\" female pipe thread ize main outlets: 1/4\" female pipe thread

ndard, 2 connections (one at each end of common size) will be provided. One of these will be utilised by the user as an inlet, the can either be blanked off or fitted with a valve to facilitate purging, should a purge valve be required then the style should be y stated at enquiry stage. .

n connect a single isolate valve to the inlet to act as a primary isolate valve allowing the user to totally isolate all the outlet from the supply point. Such a requirement must be stated separately at enquiry stage, the valve style should be clearly ied.

additional valve requirements will be structured into the part number at quotation stage.

ting holes dia: 6.5mm (1/4\") Pressure Rating: Max. 300 psig (21 barg) erature Rating: Max. 100°C (212°F) Materials: AISI 316 St. St. times: Max. up to 8 weeks. Minimum quantity: 5 off.

Part Number Construction

es

M

316 SS – S

Material

5 or 10 No of

1/2\" - 8

Main In (A)

FNPT - N BSPT - K BSPP - R

Thread Distribution Style Style

1/4\" - 4 Conns. (C)

FNPT - N NACE - NACE BSPT - K BSPP - R Options

valves out (B)

ple part number: ADMS108N4NNACE

Description: Low pressure air distribution manifold (ADM) produced in 316 stainless steel (S) ) complete with (10) valves with 2 x 1/2\" NPT female connections (8) NPT (N) and 10 x 1/4\" (4) NPT (N) female outlet connections, NACE compliant.

Hi-Pro Air Header Manifold June 2003 Issue 1

Series: HPAHM

Description: High Pressure Air Header Manifold with up to 20 Parker Hi-Pro ball valve outlets, assembled to manifold body using welded nipple to taper threaded valve connection.

Main outlet (B)

Distribution outlets C (8 in this example)

Main inlet (A) Maximum number of valves: 20

Minimum number of valves: 4

Valve style: Hi-Pro Ball Style (10mm bore)

Max. size main inlet: 1\" pipe thread, 2\" socket weld, 2\" flange

Min. size main inlet: 1/4\" female pipe thread/tube or pipe socket weld Max. size main outlets: 1\" pipe thread, 2\" socket weld, 2\" flange

Min. size main outlets: 1/4\" female pipe thread/tube or pipe socket weld

As standard, 2 connections (one at each end) will be provided. One of these will be utilised by the user as an inlet, the other can either be blanked off or fitted with a valve to facilitate purging, should a purge valve be required then the style should be clearly stated at enquiry stage.

We can connect a single isolate valve to the inlet to act as a primary isolate valve allowing the user to totally isolate all the outlet valves from the supply point. Such a requirement must be stated separately at enquiry stage and the valve style should be clearly specified.

These additional valve requirements will be structured into the part number at quotation stage.

Mounting/support: Standard mounting as depicted in example or as specified by customer.

Pressure Rating: Max. 6000 psig (414 barg) for valves - Tube/Pipe size to be designated by customer Temperature Rating: Refer to CAT 4190 HBV for P/T graph. Materials: AISI 316 St. St.

Options: All valve options listed in CAT 4190 HBV can be supplied. Lead times: Max. up to 8 weeks. Minimum quantity: 5 off

Part Number Construction

Series Material No of Main in (A) Valves out (B) (see note 1) HPAHM 316 SS - S 4 - 20 1/2\" - 8 3/4\" - 12 1\" - 16 1 1/2\" - 24 2\" - 32 Style (A & B) Distribution Style Options Conns. (C) Female

FNPT - N 1/4\" - 4 NPT - N Suffix as per BSPT - K 3/8\" - 6 BSPT - K CAT 4190 HBV BSPP - R 1/2\" - 8 BSPP - R Custom mount Pipe socket weld - 3/4\" - 12 - C SWNB 1\" - 16 (see note 3) Tube socket weld - SWTB

Flange - F(see note 2)

Example part number: HPAHMS2016FSA8N4N

Description: Air header manifold (HPAHM) produced in 316 stainless steel (S) complete with 20 ball valves (20) with 1\" (16) flange (F) smooth spiral raised face (S) class 150 (A) main inlet, 1/2\" (8) NPT (N) female main outlet, 20 x 1/4\" (4) NPT (N) female ball valve distribution outlets.

Note 1: When main outlet is different size to main inlet then add main outlet designator after main inlet designator.

Note 2: When flange connection required use the part no. designators in the Flange catalogue CAT 4190 FP for flange face and class.

Note 3: For customised bracket support please specify separately.

Low Pressure Air Header Manifold June 2003 Issue 1

Series: LPAHM

Description: Low Pressure Air Header Manifold with up to 20 ball valve outlets, assembled to manifold body using welded nipple to taper threaded valve connection.

Main outlet (B)

Distribution outlets C (8 in this example) Maximum number of valves: 20

Main inlet (A) Minimum number of valves: 4

Valve style: Low Pressure Ball Style

Max. size main inlet: 1\" pipe thread, 2\" socket weld, 2\" flange

Min. size main inlet: 1/4\" female pipe thread/tube or pipe socket weld Max. size main outlets: 1\" pipe thread, 2\" socket weld, 2\" flange Min. size main outlets: 1/4\" female pipe thread/tube or pipe socket

As standard, 2 connections (one at each end) will be provided. One of these will be utilised by the user as an inlet, the other can either be blanked off or fitted with a valve to facilitate purging, should a purge valve be required then the style should be clearly stated at enquiry stage.

We can connect a single isolate valve to the inlet to act as a primary isolate valve allowing the user to totally isolate all the outlet valves from the supply point. Such a requirement must be stated separately at enquiry stage and the valve style should be clearly specified.

These additional valve requirements will be structured into the part number at quotation stage.

Mounting/support: Standard mounting as depicted in example or as specified by customer.

Pressure Rating: Max. 220 psig (15 barg) for valves - Tube/Pipe size to be designated by customer Materials: AISI 316 St. St. Lead times: Max. up to 8 weeks. Minimum quantity: 5 off

Part Number Construction

Series Material No of Main in (A) Style (A & B) Distribution Style Options Valves out (B) Conns. (C) Female (see note 1) LPAHM 316 SS - S 4 – 20 1/2\" – 8 FNPT - N 1/4\" - 4 NPT - N 3/4\" - 12 BSPT - K 3/8\" - 6 BSPT - K 1\" – 16 BSPP - R 1/2\" - 8 BSPP - R Custom mount - 1 1/2\" - 24 Pipe socket weld - 3/4\" - 12 C 2\" – 32 SWNB 1\" - 16 (see note 3) Tube socket weld - SWTB Flange - F(see note 2)

Example part number: LPAHMS2016FSA8N4N

Description: Low pressure air header manifold (LPAHM) produced in 316 stainless steel (S) complete with 20 ball valves (20) with 1\" (16) flange (F) smooth spiral raised face (S) class 150 (A) main inlet, 1/2\" (8) NPT (N) female main outlet, 20 x 1/4\" (4) NPT (N) female ball valve distribution outlets.

Note 1: When main outlet is different size to main inlet then add main outlet designator after main inlet designator.

Note 2: When flange connection required use the part no. designators in the Flange catalogue CAT 4190 FP for flange face and class.

Note 3: For customised bracket support please specify separately.